Page History

CLIENT DISTANCE MEASURED IN LIGHTYEARS

Every now and then, a Cmdr falls asleep in supercruise and wakes up to flashing red lights and a drained and shutdown ship on lifesupport. In really bad cases, the client may find himself lightyears from the mainstar. 

You can calculate an approximate time for distances measured in LY using this formularformula:

( distance in LY * 365d * 24h ) / 2001c  = hours of travel + rough estimate to account for acceleration to max speed.

You can calculate an approximate time for distances measured in LS using this formula:

( distance in LS / 60m / 60s ) / 2001c  = hours of travel + rough estimate to account for acceleration to max speed.

The (really) rough estimate to account for acceleration could be as follows:

• Over about 2000 kls, 15 minutes,
• Over 400 kls, 10 minutes,
• Over 20 kls, 5 minutes,
• Over 1kls, 2 minutes.

The estimate to account for acceleration should never be over 15 minutes if the client is in deep space.

Examples:

Client beacon is 0.1LY from mainstar:

(0.1 * 365 * 24) / 2001 = 0.44 hours (about 26 mins) +  45mins 15mins to account for acceleration = About  1 hour and 11 About  41 minutes to reach client(adding a bit longer acceleration time on this "shorter" range, because topspeed won't be reached)

Client beacon is 0.2LY from mainstar:

(0.2 * 365 * 24) / 2001 = 0.87 hours (about 53 mins) +  30mins 15mins to account for acceleration = About  1 hour and 23 8 minutes to reach client

Client beacon is 0.5LY from mainstar:

(0.5 * 365 * 24) / 2001 = 2.19 hours + ½ hour15 minutes = About 2 :40 hour and 25 minutes to reach client

Client beacon is 2.5LY from mainstar. 

(2.5 * 365 * 24) / 2001 = 10.94 hours + ½ hour15 minutes = About 11½ 11 hours and 10 minutes to reach client

Going far distances in your ship will require quite a bit of fuel. It'd be advised to shutdown unneeded modules while travelling to extend your range, such as shields and anything else with a power consumption you might not require to continue supercruise. (obviously be careful not to accidentally shutdown your thrusters or frameshift drive and you'll still need your sensors active).

You can look at your fuel usage gauge to estimate how much fuel will be needed for the trip once you have an idea of how long it should take. For example running at 1.5t/h would make you need 12 tonnes fuel for an 8 hour supercruise, then add estimated limpets needed + enough fuel left to jump to nearest system. Note again, that you can likely get the usage down when turning off unneeded modules during the flight.